Stealth Clarity FFP3 Transparent Respirator Mask - Pack of 5
SKU: HMS-008
$26.59 incl. GST
Stealth Clarity FFP3 NR disposable respirator with a transparent anti-fog communication window, Hepac-Lite® filtration, adjustable continuous-loop head strap and built-in nose clip. Pack of 5.
Key features
FFP3 NR disposable particulate respirator
Transparent window allows the wearer's mouth and facial expressions to remain visible
Anti-fog window helps maintain clear visibility during use
Designed to support communication and lip reading
Hepac-Lite® filter technology
Low breathing resistance
Reduced condensation build-up
One continuous-loop head strap mechanism for adjustment
Built-in metal nose clip assists facial seal
Compact lightweight ergonomic design
Latex-free construction
Unvalved respirator
Protects against suitable dusts, mists, fumes and airborne micro-organisms within manufacturer limitations
The Stealth® Clarity is a disposable FFP3 NR respirator designed to combine high-level particulate respiratory protection with a transparent anti-fog window that keeps the wearer's mouth and facial expression visible. This can be particularly useful where clear communication, lip reading and visible facial expression are important. The compact ergonomic design uses Hepac-Lite® filter technology for low breathing resistance and reduced condensation build-up. A continuous-loop head strap allows adjustment around the head, while a built-in metal nose clip assists positioning and facial seal. The respirator is latex free, unvalved and designed for single-shift use. Each HMS pack contains five respirators.
BrandStealth
Product typeFFP3 NR transparent particulate respirator
Pack sizePack of 5
StyleTransparent / headband / unvalved
Store SKUHMS-008
Packed weight0.06 kg
Standards & classification
The supplied Stealth Clarity technical documentation identifies this respirator as FFP3 NR and states certification to EN 149:2001 + A1:2009.
FFP3 is the verified classification used by HMS for this exact model based on the supplied technical documentation.
The product is marketed by some Australian retailers using N95 terminology. HMS does not represent this product as holding a separate NIOSH N95 approval unless that certification is independently documented for this exact model.
Australian retailer CO2 Radical states that the product is TGA approved and has been listed for use by WA Health. HMS has not included those statements as formal certification claims here because the corresponding official regulatory listing has not yet been independently verified.
Fit & sizing guidance
The Stealth Clarity is a tight-fitting headband respirator with a continuous-loop strap and built-in metal nose clip.
Position the respirator so it covers the nose, mouth and chin. Adjust the continuous-loop strap so the respirator is held securely against the face, then mould the nose clip around the bridge and sides of the nose.
A close facial seal is essential for effective respiratory protection. Facial hair or other objects within the sealing area may interfere with the seal.
Check the seal each time the respirator is fitted. Where respiratory protection is required occupationally, appropriate selection, training and fit testing should form part of the workplace respiratory protection program.
Directions for use
Read and follow the current manufacturer instructions supplied with the respirator before use.
Before fitting, inspect the respirator, transparent window, nose clip and strap for damage or contamination.
1. Open and position the respirator over the nose, mouth and chin.
2. Place and adjust the continuous-loop head strap so the respirator sits securely against the face.
3. Adjust the lower portion around the chin and sides of the face.
4. Using both hands, mould the built-in metal nose clip to the shape of the nose.
5. Check around the full sealing edge for obvious leakage.
6. Reposition the respirator and strap if an adequate seal is not achieved.
7. Replace the respirator if it becomes damaged, heavily contaminated or otherwise unsuitable for continued use.
The manufacturer describes this model as a single-shift disposable respirator with a maximum use period of eight hours. Actual replacement may be required sooner depending on contamination, damage, breathing resistance and workplace conditions.
Warnings & use limitations
Correct respirator selection, fitting and use are essential.
A close seal between the respirator and the face is required. Facial hair or other interference within the sealing area may prevent an adequate seal.
Do not use a damaged, excessively soiled or otherwise compromised respirator.
The transparent window is designed for visibility and communication but does not remove the need for correct respirator fitting.
The supplied manufacturer information describes protection against suitable dusts, metal fumes, oil and water mists and micro-organisms within the limitations of an FFP3 particulate respirator.
Do not assume protection against gases or vapours unless specifically stated by the manufacturer for the intended application.
The respirator is marked NR, indicating a non-reusable filtering facepiece intended for single-shift use.
Respiratory protective equipment should be selected according to the actual hazard, contaminant concentration and applicable workplace requirements.
Incorrect selection, fitting or use can reduce respiratory protection.
Do not use for
Oxygen-deficient atmospheres.
Unknown contaminant concentrations or conditions immediately dangerous to life or health.
Gases or vapours unless specifically permitted by the manufacturer for the application.
Use where facial hair or another obstruction prevents an adequate face seal.
Reuse beyond the manufacturer's single-shift NR limitation.
Use if the respirator, transparent panel, strap or nose clip is damaged.
Any application outside the limitations of the current manufacturer instructions and applicable workplace respiratory protection requirements.
Storage
Store unused Stealth Clarity respirators in their original packaging in a clean, dry environment protected from contamination, direct sunlight, excessive heat, moisture and physical damage. Inspect the packaging and respirator before use and follow any expiry or storage conditions printed on the current product packaging.
Filter constructionLayered polypropylene and polyester
Head attachmentContinuous-loop head strap
Nose adjustmentBuilt-in metal nose clip
LatexLatex free
Manufacturer-stated filtrationUp to 99.99% of particles
Suitable particulate hazards stated by supplierDusts, metal fumes, oil and water mists and micro-organisms
DisposableYes
Use classificationSingle shift / maximum 8 hours
Mask dimensionsApproximately 130 mm x 12 mm x 103 mm
Mask body weightApproximately 7.36 g
Country of manufactureUnited Kingdom
Retail pack sizePack of 5
Frequently asked questions
Why does the Stealth Clarity have a transparent window?
The anti-fog transparent panel keeps the wearer's mouth and facial expression visible. This can assist communication, lip reading and emotional expression where an ordinary opaque respirator makes this difficult.
Is the Stealth Clarity an FFP3 respirator?
Yes. The supplied technical documentation identifies the Stealth Clarity as FFP3 NR and states compliance with EN 149:2001 + A1:2009.
Is the Stealth Clarity an N95 respirator?
The product is marketed by some Australian retailers as an N95 transparent respirator. The technical documentation supplied to HMS specifically identifies the model as FFP3 NR under EN 149. HMS therefore uses FFP3 NR as the verified certification for this model rather than claiming a separate NIOSH N95 approval.
How many Stealth Clarity respirators are in a pack?
Each HMS pack contains five respirators.
Does the transparent window fog up?
The transparent PET window has an anti-fog coating designed to reduce steaming and condensation so the wearer's mouth remains visible.
Is the Stealth Clarity latex free?
Yes. The supplied product documentation describes the respirator as latex free.
Does the Stealth Clarity have an exhalation valve?
No. It is an unvalved respirator.
How is the Stealth Clarity held on the face?
It uses a continuous-loop head strap mechanism which can be adjusted to hold the respirator securely against the face.
Does it have a nose clip?
Yes. A built-in metal nose clip is used to help shape the respirator around the nose and improve the facial seal.
What is Hepac-Lite technology?
Hepac-Lite® is the filter technology used in the Stealth Clarity. The supplier describes it as providing high particulate filtration while maintaining low breathing resistance and reducing condensation build-up.
What filtration efficiency does the manufacturer state?
Australian distributor information states that the Stealth Clarity filters up to 99.99% of particles, including bacteria, when correctly selected, fitted and used within its limitations.
Can the Stealth Clarity be reused?
It is marked NR, meaning non-reusable. The manufacturer documentation describes it as a single-shift respirator with a maximum use period of eight hours.
Can facial hair affect the fit?
Yes. Facial hair within the sealing area of a tight-fitting respirator can interfere with the seal and reduce protection.
Is this respirator suitable for people who rely on lip reading?
The transparent window is specifically designed to support visible communication and emotional expression, which can be useful when communicating with people who rely on lip reading or other visual facial cues.
Where is the Stealth Clarity made?
The supplied technical sheet states that the respirator is made in the United Kingdom.
Important product information
Respirator selection, fit and use depend on the hazard, workplace conditions and the wearer. Read and follow the manufacturer’s instructions supplied with the product. Where respiratory protection is required for work, follow the applicable workplace respiratory protection program and fit-testing requirements.
